Early spring for cooling
Book before the first hot week, when schedules are still open and a weak capacitor can be swapped without a breakdown.
Seasonal checkups
Worried the system won't make it through summer or winter? A checkup catches worn parts early, when they cost less to fix.
What a checkup does
HVAC service for homes in Wichita, KS is a planned visit to clean, test and adjust the system before it fails. A cooling checkup focuses on the outdoor coil, capacitor, contactor, refrigerant temperatures and condensate drain. A heating checkup covers the burners, flame sensor, igniter, heat exchanger, venting and safety switches.
Both include the blower, filter and thermostat, plus a look at anything that's wearing out. The goal is to find the small, inexpensive problems before they become the call on the hottest or coldest day of the year.
If something's already broken, our main page covers heating and cooling repair for every part of the system.
When to book
Book before the first hot week, when schedules are still open and a weak capacitor can be swapped without a breakdown.
A furnace check before the first cold front catches dirty flame sensors and cracked igniters.
Have the outdoor coil checked for bent fins that block airflow.
A checkup gives a clear picture of the system's condition and age.
A sudden rise in energy use often means a dirty coil, low refrigerant or a failing motor.
Drywall dust and sawdust load the filter and blower quickly.
Cooling side
AC maintenance matters more where the wind carries a lot of debris. Wichita, Kansas is one of the windier large cities in the country, averaging about 11.5 mph, with April usually the windiest month. Spring wind packs dust, leaves and cottonwood into outdoor coils just before cooling season starts.
A dirty outdoor coil raises pressures and makes the compressor work harder. Rinsing it, checking the capacitor and clearing the drain line are simple steps that help the system get through long summer runs. An AC tune-up can also include evaporator coil cleaning when the indoor coil is dirty.
Keep two feet of clearance around the outdoor unit and change the filter on schedule. Those two steps cost little and protect the coil.
Checkup pricing
A tune-up typically costs about $75 to $150 per system. Parts found during the visit, like a capacitor or flame sensor, are priced separately.
These are typical ranges, not quotes. Some contractors offer a yearly HVAC maintenance service plan that covers a spring and a fall visit, which can be the most affordable HVAC service option.
Heating side
HVAC maintenance for the heating season is mainly about safe combustion. A technician checks the burners and flame, cleans the flame sensor, tests the igniter and safety switches, and inspects the heat exchanger and venting for cracks, rust or blockages.
Furnace maintenance is the core of it, but heat pumps get a heating check too: defrost operation, backup heat strips and the controls that switch between them.
Replace or test carbon monoxide alarms at the same time. They're inexpensive and they're the last line of defense if venting fails.
Book the checkup before the first hot week of the year.
Call (316) 400-5244Checkup questions
A tune-up typically costs about $75 to $150 per system. Parts found during the visit are priced separately.
Once a year for each system is typical: the air conditioner in spring and the furnace in fall. Heat pumps benefit from both.
Cleaning the outdoor coil, testing the capacitor and contactor, checking refrigerant temperatures, clearing the drain and checking the filter and blower.
It's a chance to clean the flame sensor and check the heat exchanger and venting for safety problems before winter.
Check it monthly and change it when it's dirty, usually every one to three months for standard filters, more often with pets or construction dust.
Stay ahead of breakdowns
Tell the contractor what type of system you have and when it was last serviced. A spring or fall visit is the simplest way to avoid a mid-season breakdown.